although there are flashing lights. Can't connect to Device Hub (telescope connects). It will give a com port error or just no error at all and then the installer/moniotor window refuses to close. I would consider installing a new beaver board but there seems to be no way to find one, is it a self build thing or has Nexdome ceased to exist in any meaningful way? Just for the rotator by the way. Any ideas?
top of page
bottom of page
No problem, even though I'm French, I've been leaving in USA for 24 years so English or French .. same for me :)
I don;'t think they sale the Beaver board alone as they are now part of the rotation kit : https://www.observatory.store/NEXDOME-22M-DOME-ROTATION-KIT_p_19.html
Also with the Beaver board you might need to make quite a bit of changes to the enclosure and would need a Beaver board for the shutter too if you have the shutter kit.
In all case I would give them a call, faster than email or here.
As for the Arduino board, have you tried re-installing the firmware ?
If the Arduino is indeed dead, you can still replace it with a new one and re-install the firmware : https://www.dfrobot.com/product-832.html